Heat insulation PVC film
With nano-filling technology, nano heat insulation & anti-infrared(IR) materials are filled into the PVC plastic, this production process does not need to be coated and is formed at one time. No installation glue, convenient to use, can be pasted in summer, removed in winter, improve the efficiency of energy utilization fully, can be uncovered and reused for countless times, used for the mall door curtain or installed on the building glass directly.
Structure: 150um PVC heat insulation film+75um PET protective film
Appearance: Light blue transparent film
Visible light transmission:≥70%
Infrared blocking: ≥75%
UV blocking: ≥99%
Service life: 5-10 years
-High transparency and clarity, no effect to the natural light;
-Good heat insulation performance, over 99% IR blocking rate;
-Flat surface, no dirt point;
-Long service life, non-fading, heat insulation property never reduce, no precipitation.
It is used in the fields which require anti-infrared and heat insulation function, such as building glass, automobile glass, door curtain of shopping mall and other fields.
Application steps is listed briefly as follows:
1.Clean the glass first.
2.Remove the pet protective film.
3.Spray water (with a little body wash) on the adhesive and the glass.
4.Paste the PVC film and move it to the right place.
5.Remove the water and bubbles with the scraper.
Packing: 0.92 m*61 m/roll or other customized size.28 Rolls/ pallet.
Storage: In a cool, dry place at room temperature.