Wear-resistant & Hardened Coating High Gloss for Metal
Although there is a dense oxide film protective layer on the metal surface, it will react and be corroded when the acid and alkali solution is encountered, especially some anions will accelerate the corrosion of the metal. Therefore, a protective layer needs to be made on the surface of the metal. The metal surface protective coating produced by our company can effectively infiltrate into the interior of the metal substrate and form a dense film, which can effectively protect the metal from corrosion. At the same time, the hardness and wear resistance of the metal surface have been greatly improved, and it also has the function of anti-fouling, hydrophobic and hydrophobic oil. JHU-RUD is a specially coating that used for metal surface, which makes the surface wear-resistant and hard, with better gloss . It is suitable for UV-curing and convenient for large-scale industrial coating.
-Good wear resistance, resistance to steel wool friction more than 5000 times;
-Excellent adhesion, cross lattice adhesion up to grade 0;
-Strong weather resistance, no change in the conditions of sun, rain, wind, summer heat, cold weather and other temperature changes, and no yellowing after a long time;
-Flat coating film and good fullness;
-Good flexibility and high hardness;
-Colorless and transparent, no effect on the color and appearance of the original substrate;
-Easy to use, suitable for large-scale industry coating.
The coating is suitable for the wear-resistant and hardening treatment on marble and ceramic tiles, such as marble floor, marble workbench, marble furniture and so on.
According to the shape, size and surface state of the substrate, the appropriate application methods, such as shower coating, wiping coating, and spraying is selected. It is suggested that a small area should be tested before application. Take shower coating as an example to describe application steps briefly as follows:
Step 1: Coating. Choose the appropriate coating process;
Step 2: After coating, stand at room temperature for 3 minutes to make the full leveling;
Step 3: Drying. Heating for 1 minute in the oven at 130 ℃ and fully volatilizing the solvent;
Step 4: Curing. 3000W UV lamp (with a distance of 10-20 cm, wavelength of 365 nm) curing for 10 seconds.
1.Keep sealed and store in a cool place, make the label clear to avoid misusing.
2.Keep far from the fire, at the place where children can’t reach;
3. Ventilate well and prohibit the fire strictly;
4. Wear PPE, such as protective clothing, protective gloves and goggles;
5. Prohibit contacting with the mouth, eyes and skin, in case of any contact, flush with large amount of water immediately, call a physician if necessary.
Packing:1 liter/bottle; 20 liter/barrel.
Storage: In a cool, dry place, avoiding sun exposure.