Ana amfani da wannan matsakaicin zafin zafi don resin acrylic, wanda galibi ana amfani dashi don samar da fim ɗin bangon zafi.Ayyukansa na zafin jiki ya fi ATO da ITO da ke ƙasa da 1000nm a kusa da infrared yanki, wanda shine wuri mafi mahimmanci na tasirin dumama ga fatar mutum.Fim ɗin taga mai ɗaukar zafi wanda matsakaicin ke samarwa zai iya haɓaka jin daɗin jikin ɗan adam sosai kuma yana adana makamashin lantarki sosai, yana sa mutane su ji daɗin dumi a cikin hunturu da sanyi a lokacin rani, wanda ke ba da garantin fasaha don ƙirƙirar kwanciyar hankali, yanayin yanayi da makamashi. -ceton yanayi na cikin gida.

Siga:

Siffa:

-Ƙaramin girman barbashi da uniform.

-Lokacin da ake iya gani haske watsa kudi 70%, da infrared blocking rate ≥95%;

- Kyakkyawan dispersibility, dacewa mai kyau tare da resin acrylic;

- Kyakkyawan kwanciyar hankali, babu stratification da hazo bayan dogon lokacin kiyayewa;

-Karfafa yanayin juriya, bayan gwajin QUV 5000h, babu lalata aikin, babu canjin launi;

-Yana da adadin haƙƙin mallakar fasaha masu zaman kansu, tare da fa'idodin fasaha da farashi;

- Amintaccen kuma abin dogaro, babu halogen, babu ƙarfe mai nauyi.

Aikace-aikace:

Ana amfani da shi don yin fim ɗin bango mai mahimmanci, wanda za'a iya amfani dashi don mota da gilashin ginin don samun zafi mai zafi, ceton makamashi, inganta jin dadi, ko kuma ana amfani da shi a wasu wurare tare da buƙatun zafin zafi ko infrared.

Amfani:

Lura: Ƙananan gwajin samfurin tare da guduro ya zama dole kafin amfani.

Mataki 1: Fitar da kayan da ke ƙasa ta nauyin nauyi: CQ-81G18-TOL: wakili mai diluting: resin acrylic = 1.5: 4: 4.Daidaita CQ-81G18-TOL bisa ga sigar da aka buƙata (7095) tare da injin gwaji tare da 950nm.

Mataki na 2: Hadawa.Mix su daya bayan daya: ƙara CQ-81G18-TOL - ƙara diluting wakili - stirring - ƙara acrylic guduro yayin motsawa.Ana motsawa na kimanin minti 40 bayan ƙara acrylic, sannan a tace cakuda tare da zane mai tacewa 1um.

Mataki 3: Zabar PET ainihin fim.Zaɓi ainihin fim ɗin PET tare da VLT sama da 90% da Layer corona.

Mataki na 4: Rufi.Rufe su (cakuɗin a mataki na 2) akan fim ɗin PET ta injin rufe fuska mai jika.

Mataki na 5: bushewa, laminating.Sarrafa kauri mai rufi tsakanin 6-8um, bushewa Zazzabi: 85 ~ 120 deg.

Bayanan kula:

1. CQ-81G18-TOL ba za a iya ƙarawa don sake daidaitawa a lokacin tsarin batching ko bayan an gama abubuwan sinadaran.

2. A cikin kowane hadawa, dole ne a kiyaye tsari na ƙari sosai, musamman cewa ba za a iya amfani da tanki mai haɗawa ba tare da tsaftacewa sosai ba, ko da ɗan ƙaramin ruwa mai aiki zai haifar da matsala mai tsanani kamar hazo mai hatsi.

3. Lokacin tsaftace bututu da kayan aiki masu alaƙa, dole ne a yi amfani da diluti na musamman.

Bayanan kula:

1. Ajiye hatimin kuma adana a wuri mai sanyi, sanya alamar a sarari don guje wa yin amfani da shi.

2. Ka nisa daga wuta, a wurin da yara ba za su iya kaiwa ba;

3. Sanya iska da kyau kuma a hana wuta sosai;

4. Sanya PPE, irin su tufafin kariya, safar hannu masu kariya da tabarau;

5. Hana tuntuɓar baki, idanu da fata, idan akwai wani lamba, zubar da ruwa mai yawa nan da nan, kira likita idan ya cancanta.

Shiryawa:

Shiryawa: 1kg / kwalban;20kg/ ganga.

Adana: a wuri mai sanyi, bushewa, guje wa fallasa rana.