Fim ɗin taga mai haske mai launin shuɗi yana aiki ta hanyar tunani da shayar da hasken shuɗi. A gefe guda, ana amfani da ƙwayoyin nano na zinc oxide da titanium oxide don yin tunani da watsar da hasken shuɗi;a daya bangaren kuma, ana amfani da na'urar daukar hoton haske mai launin shudi don gudanar da shanyewar hasken shudin.Wannan samfurin yana da kyakkyawar fa'ida, juriya mai ƙarfi da aikace-aikace mai faɗi.

Siga:

Lambar: 2J-L410-PET50/23

Amfani da kauri Layer: 60μm

Tsarin: 1ply (BOPET Anti-Blue Light Base Film, ba mai rufi)

watsa haske mai gani: ≥88%

Kashe UV: ≥99% (200-410nm)

Nisa: 1.52m

Adhesive: Matsi mai mannewa

Siffa:

1. Babban nuna gaskiya. Hasken hasken da ake gani ya kai kan 88% tare da kayan albarkatun gani.

2. High block rate.Wannan fim zai iya toshe 99% UV da blue haske a kasa 410nm, shi ma zai iya toshe 30% -99% kalaman tsakanin 400nm da 500nm (mafi girma block rate, nauyi launi).

3. Dogon rayuwa mai amfani tare da launi wanda baya shuɗewa.Ɗauki fim ɗin tushe mai inganci da manne, ba zai yi rawaya, degum ko kumfa gubar ba, rayuwa mai amfani ta kai shekaru 10.

4. Amintacce da hana fashewa.Kyakkyawan m na fim zai tsaya a kan gilashin da kyau kuma ya kare lafiya.

5. Amintacce da kare muhalli.Ɗauki kayan da ba mai guba ba, marasa lahani kuma masu dacewa da muhalli, babu iskar gas mai cutarwa, babu canza launi, ba ta taɓa shuɗewa.

6. Guji dushewar kayan ado na ciki da inganta rayuwar motoci da kayan daki.

7. Kare idanu da fata na mutane, da kuma hana cutar UV da hasken shuɗi.

Aikace-aikace:

-Ana amfani da shi don ginin gilashi, irin su kantuna, makarantu, asibitoci, ofishin kasuwanci, gidaje don kariya ta UV da shuɗi.

-Ana amfani da motoci, jiragen ruwa, jiragen sama da sauran gilashin abin hawa'UV da kariyar haske mai shuɗi.

-An yi amfani da shi don wasu filayen da ke da buƙatun toshe UV da hasken shuɗi.

Amfani:

Mataki na 1: Shirya kayan aiki kamar kettle, rigar da ba a saka ba, scraper filastik, goge roba, wuka.

Mataki 2: Tsaftace gilashin taga.

Mataki 3: Yanke ainihin girman fim ɗin bisa ga gilashin.

Mataki na 4: Shirya shigar ruwa, ƙara wani abu mai tsaka tsaki a cikin ruwa (gel ɗin shawa zai fi kyau), fesa gilashin.

Mataki na 5: Yage fim ɗin sakin kuma manna fim ɗin taga a saman gilashin rigar.

Mataki 6: Kare fim ɗin taga tare da fim ɗin saki, cire ruwa da kumfa tare da scraper.

Mataki na 7: Tsaftace saman da busasshen zane, cire fim ɗin saki, kuma shigar da shi.