I-Flame Retardant Masterbatch
IParameter yeMveliso
| Imveliso | I-Flame Retardant Masterbatch | I-Flame Retardant Masterbatch |
| Ikhowudi | ZRT-PET (isiseko sepolymer eyenziwe ngokwezifiso) | ZRB-PET (isiseko sepolymer eyenziwe ngokwezifiso) |
| Imbonakalo | Isuntswana elimhlophe elibonakalayo | Iqhekeza elimhlophe elimhlophe |
| Umxholo osebenzayo oqinileyo (%) | 10±0.2 | 10±0.2 |
| Isalathisi sokunyibilika (MI, dL/g) | 11.0±2.0 | 10.8±2.0 |
| I-viscosity yangaphakathi (IV, g/10min) | 0.59±0.05 | 0.57±0.05 |
| Indawo yokunyibilika (℃) | 260±10 | 260±10 |
| Ukufuma (%) | ≤0.03 | ≤0.03 |
| Inkungu (%) | <1 | / |
| Umboniso wefilimu elubala weVLT% | 90 | / |
| Ubuninzi (g/cm3） | 1.40 | 1.42 |
| Ubunzima bamasuntswana ali-100(g) | 1.84 | 2.17 |
Uphawu lweMveliso
I-flame-retardant egqwesileyo, inokufikelela kwi-UL94-V0;
Ukusasazwa kakuhle, akukho qabaka, akukho mvula, akukho kungcoliseka kothuli;
Ubume bendawo, umsi ophantsi, akukho DBDO enetyhefu kunye neDBDF ngexesha lokutsha.
Indawo yosetyenziso
Isetyenziselwa ukuphuhliswa kweemveliso ze-flame-retardant, sinikezela ngeentlobo ezahlukeneyo ze-polymer, ezifana ne-PET, i-PE, i-PC, i-PMMA, i-PVC, njl.
*Isetyenziselwa izinto zokwakha iikhemikhali, ibhodi yogwebu, umbhobho weplastiki, izinto zokuhombisa, izixhobo zikawonke-wonke zeplastiki, njl.
*Isetyenziselwa izindlu zombane kunye nezinto zokuhombisa zangaphandle, iiphaneli, amathambo, iiswitshi, izixhasi, izithuba zeengcingo, njl.
*Isetyenziselwa iindawo zemoto, ezinje ngedesika yolawulo lwemoto, ipleyiti yocango, iindawo zombane zemoto, iitanki zeoyile, njl.
*Isetyenziselwa kwezinye iindawo apho ucutho lwedangatye lufuneka.
Indlela yokusetyenziswa
Ngokweeparamitha zemveliso kunye neenkcukacha ezifunekayo, jongana netafile yereferensi yedosi, xuba kunye nezilayi zeplastiki eziqhelekileyo, kwaye uvelise njengenkqubo yokuqala.
Ukugcinwa kwePakethi
Ukupakisha: 25 kgs / ibhegi.
Ugcino: kwindawo epholileyo neyomileyo.
